ROTEL RC1572

kr 9 995

RC1572 er en avansert forforsterker med mange muligheter. Utallige tilkoblinger som bl.a. XLR (inn & ut) MM phono, Bluetooth og USB. Den byr også på en meget god DAC som håndterer opptil 32bit/384kHz lydfiler. Med RC1572 starter den gode lytteopplevelsen.

Farge

Clear selection
,

The RSP-1582 is a home theatre preamplifier/processor, of course, but first and foremost, it truly shines as an audio component. For example, six Wolfson 24-bit/192kHz devices are arrayed as four independent DACs for Front Left, Front Right, Center and Subwoofer channels with shared stereo DAC’s for the rear channels. This topology offers exemplary performance all around, but provides the absolute best quality on the most critical channels. In theatre mode, a Texas Instruments Aureus DSP high-performance decoder is utilized with 10-channel Parametric Equalization. A high performance Texas Instruments Analogue-to-Digital convertor is used to facilitate optimum conversion of analogue signals for playback in surround sound modes. Balanced XLR and single ended connections are offered, and the audio stages use premium components in all signal critical applications. For pure stereo playback of analogue sources, the RSP-1582 features an analogue bypass to obtain the cleanest path.

For video use, the preamp/processor incorporates eight HDMI 2.0 video inputs all supporting 4K video resolution, three with HDMI 2.0 and HDCP 2.2. Dual HDMI outputs both support HDMI2.0. The modular approach of the video board supports future updates if necessary.

Other features include one front panel HDMI input with 4K video pass-through, built-in aptX Bluetooth technology, a PC-USB input that supports 24-bit/192kHz audio, CD, Tuner and 4 AUX analogue inputs, along with a multichannel input and XLR input. It even has a phono stage!

There is a seven-inch TFT display on the front panel to provide easy adjustments to all audio and video parameters without the need to turn on an external display or video projection system – perfect for when the equipment rack is remote located. And the RSP-1582 comes with rack ears in the box to make such installations easy.

In addition to its unassailable audio and video performance, custom installers will find the RSP-1582 ideal for any installation application with RJ45 network connection, Internet or USB front panel software updates, three source independent trigger outputs, a wired IR remote input, RS232 and IP interface for automation system control, 2 x IR output connectors for IR pass-through and front panel setup navigation control.

All of these features and technology mean nothing, though, if the end result doesn’t meet your performance expectations. That’s why Rotel engineers spend countless hours measuring, listening and refining the circuitry. The end result is a surround processor/preamplifier that is worthy of the finest music systems andtheatres at an unrivalled price.

Vekt 12 kg
Dimensjoner 41.7 × 43.1 × 18.8 cm
Farge

Sort, Sølv

Spesifikasjoner

TOTAL HARMONIC DISTORTION (THD)(20Hz–20kHz) <0.004%

FREQUENCY RESPONSE
Line Level Inputs: 10Hz – 100kHz ±0.3dBDigital Inputs: 20Hz – 20kHz ±0.5dB
Phono Input: 20Hz – 20kHz ±0.3dB
S/N RATIO (IHF "A" Weighted)
Line Level Inputs: 110dB
Digital Inputs: 100dB
Phono Input: 80dB
INTERMODULATION DISTORTION (60Hz:7kHz, 4:1)
<0.004%

INPUT SENSITIVITY
Line Level Inputs (RCA): 200mV
Line Level Inputs (XLR): 300mV
Phono Input (MM): 3mV

INPUT IMPEDANCE
Line Level Inputs (RCA): 100kΩ
Line Level Inputs (XLR): 100kΩ
Digital Inputs: 75Ω
Phono Input (MM): 47kΩ
INPUT OVERLOAD
Line Level Inputs: 4V
Phono Input: 62mV

OUTPUT LEVEL
Unbalanced (RCA): 1V
Balanced (XLR): 2V

TONE CONTROLS
±10dB at 100Hz / 10kHz
COAX/OPTICAL DIGITAL INPUT SIGNALS
LPCM (Up to 24-bit/192kHz)

PC-USB
USB Audio Class 1 (up to 24/96)
USB Audio Class 2 (up to 32/384)*
*Driver Installation Required
DSD/DoP 1x, 2x

Merke

Rotel

Kategori:
Updating…
  • Du har ingen produkter i handlekurven.
{"cart_token":"","hash":"","cart_data":""}